DIY Repair of the upper belt line on a 2006 Monaco Diplomat. Please note we are not professionals and this video is intended to provide advice for other DIY'ers. List of supplies:

For more info or to join Bill D's Monacoers: monacoers.org/

Supplies
Stainless Steel rivets - We used 18-8 Stainless Steel Blind Rivets, Domed Head, 3/16" Diameter, for 0.751"-0.875" Material Thickness. (McMaster-Carr or Albany Albany (Approximately 100 rivets / beltline)
13/64 drill bits (At least 1/beltline) WITH a stop collar set at 1"
ProFlex clear RV caulk (Approximately 1 tube / beltline)
Caulk removal tools
Plastic razor blades
3-in-1 caulk removal tool
small nylon bristle bush
DeSolveIt Contractor's caulk removal or Boesheild T-9
3" painter's tape
Denatured alcohol (for cleaning before caulk application)
nitrile gloves (for caulk application)
mineral spirits (for smoothing Proflex and cleanup))
Patience... LOTS and LOTS of patience

Tools
Drill
Air rivet gun & compressor OR Heavy Duty (two handled) pop rivet gun (single-lever handheld rivet guns struggle to handle stainless steel pop rivets)
caulk gun
scaffolding (strongly preferred) or ladder (?)
utility knife (& extra blades)